About us
As Budmat PV Systems, we specialize in the production and sale of products such as: structures for photovoltaic farms, cold-bent structures such as roof purlins, wall transoms etc., steel structures, design services, materials processing services.
We provide comprehensive cooperation at every stage of the implementation of the investment:
• calculations and planning,
• selection of the right products,
• deliveries on schedule,
• technical assistance with installation,
• support during use.
Our solutions are used by the largest energy producers and suppliers in Poland and Europe, choosing Budmat products for their investments.
Professional and comprehensive
customer support
in the implementation of investments.
Products dedicated to photovoltaic farms are made of high quality steel in magnelis coating® ZM310, ZM430, ZM620 and ZM800.
Production capacity:
2 GW of PV support structures per year
By the end of 2024, we will reach a production capacity of 3 GW of PV support structures per year.
SUPPORT STRUCTURES FOR PHOTOVOLTAIC MODULES.
• Top of the range
• Environmental care
• Cost optimization
• Investment security
The realization of an investment with Budmat PV systems means only benefits:
- easy and quick installation – proven and precisely manufactured solutions
- cost optimization – production for individual orders according to the needs of the investment
- wide application – the variety of construction models gives the opportunity to carry out investments in any terrain
- high quality and safety – the best steel from arcelormittal steel in magnelis coating® long-term use guarantee
- individual approach – every investment is the most important for us, our own machine park and an experienced team of specialists give you the confidence of a personalized offer to your expectations and needs
- environmental protection – the highest quality magnelis-coated steel® is 100% recyclable and can also be reprocessed.
A wide range of steel structures:
- driven into the ground,
- fixed to concrete ballast blocks,
- tilt angle range : 15°, 20°, 25°, 30°, 35°,
- configurations of the number of vertical and horizontal panels on one table: 4×3, 4×4, 4×5, 4×6, 4×7, 4×8, 4×9,
- single-support and two-support structures,
- individual projects up to non-standard module sizes.
BUDMAT.
NATURE-FRIENDLY TECHNOLOGIES.
Sustainability is not a fad, but a necessity and a duty – for many years Budmat has been taking steps to minimise the environmental impact by investing in modern technologies and processes of rational waste management. Budmat photovoltaic module support systems offer a wide range of innovative components for the production of clean energy without generating CO2.
For the sake of the environment and for future generations, we develop and invest in modern technologies, eco-friendly products and innovative solutions. Our commitment to clean energy production from renewable sources is our direction for improving the quality of life in a clean, friendly environment, minimizing the impact on the environment.
Using many years of experience, knowledge and the latest technologies, our experts have designed support structures for the construction of photovoltaic farms that meet the highest quality standards. Budmat’s offer meeting the highest quality standards is addressed to both individual and institutional investors.
Good energy with products PV Systems Budmat.
Range of services
Bending of steel profiles:
- 4 mm thick and up to 13 m long using 300 ton press brakes and 6500 mm bending line 6500 mm length each.
- 6 mm thick on an HD hydraulic press with a pressure of 350 tons and a bending line length of 6100 mm.
Laser cutting of sheets up to 25 mm thick and maximum dimensions 3000×1500 mm.
Workpieces: structural steel up to 25 mm (oxygen), stainless steel up to 20 mm (nitrogen) and aluminium: up to 12 mm (nitrogen).
Laser cutting of pipes and profiles up to 8 mm thick and surrounding wheel diameter 15 – 250 mm.
Possibility of processing tubes and profiles, as well as flat bars – shape cutting of edges, burning holes.
Perforation and roller profiling of cold-bent profiles of CZS type of elements up to a thickness of 3 mm and a length of up to 15 m.
Perforating and punching / detailing of materials in the structural steel circle from 0,6 mm to 4 mm and stainless steel from 0,6 mm to 3 mm.
As Budmat PV Systems, we specialize in the production and sale of products such as: structures for photovoltaic farms, cold-bent structures such as roof purlins, wall transoms etc., steel structures, design services, materials processing services.
We provide comprehensive cooperation at every stage of the implementation of the investment:
• calculations and planning,
• selection of the right products,
• deliveries on schedule,
• technical assistance with installation,
• support during use.
Our solutions are used by the largest energy producers and suppliers in Poland and Europe, choosing Budmat products for their investments.
Professional and comprehensive
customer support
in the implementation of investments.
Products dedicated to photovoltaic farms are made of high quality steel in magnelis coating® ZM310, ZM430, ZM620 and ZM800.
Production capacity:
2 GW of PV support structures per year
By the end of 2024, we will reach a production capacity of 3 GW of PV support structures per year.
SUPPORT STRUCTURES FOR PHOTOVOLTAIC MODULES.
• Top of the range
• Environmental care
• Cost optimization
• Investment security
The realization of an investment with Budmat PV systems means only benefits:
- easy and quick installation – proven and precisely manufactured solutions
- cost optimization – production for individual orders according to the needs of the investment
- wide application – the variety of construction models gives the opportunity to carry out investments in any terrain
- high quality and safety – the best steel from arcelormittal steel in magnelis coating® long-term use guarantee
- individual approach – every investment is the most important for us, our own machine park and an experienced team of specialists give you the confidence of a personalized offer to your expectations and needs
- environmental protection – the highest quality magnelis-coated steel® is 100% recyclable and can also be reprocessed.
A wide range of steel structures:
- driven into the ground,
- fixed to concrete ballast blocks,
- tilt angle range : 15°, 20°, 25°, 30°, 35°,
- configurations of the number of vertical and horizontal panels on one table: 4×3, 4×4, 4×5, 4×6, 4×7, 4×8, 4×9,
- single-support and two-support structures,
- individual projects up to non-standard module sizes.
BUDMAT.
NATURE-FRIENDLY TECHNOLOGIES.
Sustainability is not a fad, but a necessity and a duty – for many years Budmat has been taking steps to minimise the environmental impact by investing in modern technologies and processes of rational waste management. Budmat photovoltaic module support systems offer a wide range of innovative components for the production of clean energy without generating CO2.
For the sake of the environment and for future generations, we develop and invest in modern technologies, eco-friendly products and innovative solutions. Our commitment to clean energy production from renewable sources is our direction for improving the quality of life in a clean, friendly environment, minimizing the impact on the environment.
Using many years of experience, knowledge and the latest technologies, our experts have designed support structures for the construction of photovoltaic farms that meet the highest quality standards. Budmat’s offer meeting the highest quality standards is addressed to both individual and institutional investors.
Good energy with products PV Systems Budmat.
Range of services
Bending of steel profiles:
- 4 mm thick and up to 13 m long using 300 ton press brakes and 6500 mm bending line 6500 mm length each.
- 6 mm thick on an HD hydraulic press with a pressure of 350 tons and a bending line length of 6100 mm.
Laser cutting of sheets up to 25 mm thick and maximum dimensions 3000×1500 mm.
Workpieces: structural steel up to 25 mm (oxygen), stainless steel up to 20 mm (nitrogen) and aluminium: up to 12 mm (nitrogen).
Laser cutting of pipes and profiles up to 8 mm thick and surrounding wheel diameter 15 – 250 mm.
Possibility of processing tubes and profiles, as well as flat bars – shape cutting of edges, burning holes.
Perforation and roller profiling of cold-bent profiles of CZS type of elements up to a thickness of 3 mm and a length of up to 15 m.
Perforating and punching / detailing of materials in the structural steel circle from 0,6 mm to 4 mm and stainless steel from 0,6 mm to 3 mm.